Abstract:
In this paper, for improving the performance and stability of MoS
2 saturable absorber, graphene oxide (GO) as colloidal surfactant is used to exfoliate MoS
2 bulk material for obtaining few-layer GO-MoS
2 nano-flakes. Further research on few-layer GO-MoS
2 saturable absorber to mode-lock erbium-doped fiber laser (EDFL) is then conducted. In the experiment, a stable mode-locked pulsed laser is achieved with a center wavelength of 1558 nm, a repetition rate of 7.86 MHz and a pulse width of 1.9 ps. When the pump power reaches 60.5 mW, the output power is 0.48 mW and the pulse peak power is calculated to be 32.1 W. This work shows that the new composite 2D material prepared by this method is beneficial to maintain the stability of few-layer MoS
2 and increase the damage threshold of the MoS
2 saturable absorber for passive mode-locking.
E-mail Alert
RSS
Abstract: In this paper, for improving the performance and stability of MoS2 saturable absorber, graphene oxide (GO) as colloidal surfactant is used to exfoliate MoS2 bulk material for obtaining few-layer GO-MoS2 nano-flakes. Further research on few-layer GO-MoS2 saturable absorber to mode-lock erbium-doped fiber laser (EDFL) is then conducted. In the experiment, a stable mode-locked pulsed laser is achieved with a center wavelength of 1558 nm, a repetition rate of 7.86 MHz and a pulse width of 1.9 ps. When the pump power reaches 60.5 mW, the output power is 0.48 mW and the pulse peak power is calculated to be 32.1 W. This work shows that the new composite 2D material prepared by this method is beneficial to maintain the stability of few-layer MoS2 and increase the damage threshold of the MoS2 saturable absorber for passive mode-locking.
