Citation: |
|
[1] | 韩冰, 林玉荣, 邓正隆.光纤陀螺温度漂移误差的建模与补偿综述[J].中国惯性技术学报, 2009, 17(2): 218-224. Han B, Lin Y R, Deng Z L. Overview on modeling and compensation of fog temperature drift[J]. Journal of Chinese Inertial Technology, 2009, 17(2): 218-224. |
[2] | 戴邵武, 郑百东, 李文国, 等.基于多参量模型的光纤陀螺温度误差补偿[J].导航定位与授时, 2019, 6(4): 78-82. Dai S W, Zheng B D, Li W G, et al. Temperature error compensation of fiber optic gyroscope based on multi-parameter model[J]. Navigation Positioning and Timing, 2019, 6(4): 78-82. |
[3] | 李家垒, 许化龙, 何婧.基于小波网络的光纤陀螺启动漂移温度补偿[J].光学学报, 2011, 31(5): 0506005. Li J L, Xu H L, He J. Temperature compensation of start-up drift for fiber optic gyroscope based on wavelet network[J]. Acta Optica Sinica, 2011, 31(5): 0506005. |
[4] | 李光耀, 侯宏录, 杜鹃, 等.采用小波降噪和神经网络的FOG温度漂移补偿方法[J].光电工程, 2019, 46(9): 180636. doi: 10.12086/oee.2019.180636 Li G Y, Hou H L, Du J, et al. FOG temperature drift compensation method based on wavelet denoising and neural network[J]. Opto-Electronic Engineering, 2019, 46(9): 180636. doi: 10.12086/oee.2019.180636 |
[5] | 钱峰, 田蔚风, 杨艳娟, 等.基于受控马氏链的干涉型光纤陀螺温度漂移模型[J].光电子·激光, 2003, 14(7): 705-708. Qian F, Tian W F, Yang Y J, et al. A model on temperature drift of interference fiber optical gyros based on controlled Markov chain[J]. Journal of Optoelectronics·Laser, 2003, 14(7): 705-708. |
[6] | 王威, 陈熙源.一种基于多尺度和改进支持向量机的光纤陀螺温度漂移建模与补偿方法[J].中国惯性技术学报, 2016, 24(6): 793-797. Wang W, Chen X Y. Modeling and compensation method of FOG temperature drift based on multi-scale and improved support vector machine[J]. Journal of Chinese Inertial Technology, 2016, 24(6): 793-797. |
[7] | 刘文涛, 刘洁瑜, 沈强.光纤陀螺温度漂移的多尺度建模研究[J].压电与声光, 2019, 41(3): 431-435. Liu W T, Liu J Y, Shen Q. Research on multi-scale modeling of temperature drift in fogs[J]. Piezoelectrics & Acoustooptics, 2019, 41(3): 431-435. |
[8] | 陈一平, 梁璀, 张登伟, 等.光纤陀螺磁温耦合效应[J].光子学报, 2018, 47(5): 0506005. Chen Y P, Liang C, Zhang D W, et al. Magnetic-temperature coupling effect of a fiber optic gyroscope[J]. Acta Photonica Sinica, 2018, 47(5): 0506005. |
[9] | Shupe D M. Thermally induced nonreciprocity in the fiber-optic interferometer[J]. Applied Optics, 1980, 19(5): 654-655. doi: 10.1364/AO.19.000654 |
[10] | 金靖, 宋凝芳, 李立京.干涉型光纤陀螺温度漂移建模与实时补偿[J].航空学报, 2007, 28(6): 1449-1454. Jin J, Song N F, Li L J. Temperature drift modeling and real-time compensation of interferometric fiber optic gyroscope[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(6): 1449-1454. |
[11] | IEEE. IEEE standard specification format guide and test procedure for single-axis interferometric fiber optic gyros: IEEE Std 952-1997[S]. Ne York: IEEE, 1998. |
[12] | Huang N E, Shen Z, Long S R, et al. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis[J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1998, 454(1971): 903-995. doi: 10.1098/rspa.1998.0193 |
[13] | 刘文涛, 刘洁瑜, 沈强.光纤陀螺随机误差的集成建模及滤波处理[J].光电工程, 2018, 45(10): 180082. doi: 10.12086/oee.2018.180082 Liu W T, Liu J Y, Shen Q. Integrated modeling and filtering of fiber optic gyroscope's random errors[J]. Opto-Electronic Engineering, 2018, 45(10): 180082. doi: 10.12086/oee.2018.180082 |
[14] | Wu Z H, Huang N E. A study of the characteristics of white noise using the empirical mode decomposition method[J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2004, 460(2046): 1597-1611. doi: 10.1098/rspa.2003.1221 |
[15] | 朱奎宝, 张春熹, 张小跃.光纤陀螺随机漂移ARMA模型研究[J].宇航学报, 2006, 27(5): 1118-1121. Zhu K B, Zhang C X, Zhang X Y. Study on modeling and identification of random drift for fog[J]. Journal of Astronautics, 2006, 27(5): 1118-1121. |
[16] | 马知瑶, 周一览.光纤陀螺寻北启动误差抑制方法研究[J].传感器与微系统, 2018, 37(6): 33-35. Ma Z Y, Zhou Y L. Research on suppression method of north-seeking startup error of fiber-optic gyroscope[J]. Transducer and Microsystem Technologies, 2018, 37(6): 33-35. |
Overview: The north-seeking orientation technology has wide range of applications in many fields. In the military domain, missiles, rockets, artillery, etc. cannot be launched without direction datum. Aerospace, tanks, ships, etc. cannot work without direction datum. In the civilian domain, mineral exploration, mining, geotechnical engineering, and civil engineering construction also require direction datum. Therefore, the research on north-seeking orientation technology is of great significance for realizing national defense modernization and promoting national economic development.
Fiber optical gyroscope (FOG) is an all-solid-state gyroscope based on Sagnac effect. It has the advantages of high impact resistance, high sensitivity, long life, low power consumption, and reliable integration. It is especially suitable for north-seeking orientation system. However, since the main components of FOG are sensitive to temperature, when the temperature changes, non-reciprocal phase errors will occur in the output signal of FOG, resulting in instability of the zero drift of FOG, and ultimately affecting FOG's accuracy under different temperature conditions. Therefore, the change of temperature during the startup of FOG leads to the phenomenon that the output data of FOG has a large temperature drift after power-on, and then gradually becomes stable. This startup characteristic causes FOG north-seeking startup drift, and north-seeking startup error during the cold start, which is manifested by a significant increase in the north-seeking error during the cold start and actually prolongs the effective north-seeking time.
The method for suppressing the temperature drift of the FOG generally adopts methods of improving the structure and components of the fiber gyro, improving the fiber winding technology, and controlling the temperature of FOG. But suppressing the temperature drift from the mechanism, especially for the medium and low precision FOG with small volume is very difficult. However, the temperature drift modeling compensation is a relatively simple and quick solution, and can basically meet the work requirements. Through the analysis of the factors affecting the temperature drift of FOG, the multi-parameter linear model was established by empirical mode decomposition (EMD), autoregressive-moving average (ARMA) modeling, and Kalman filtering to realize a temperature drift compensation method applied to FOG north-seeking. The experimental results show that the method can reduce the north-seeking startup error by nearly 80%, so that the startup north-seeking precision is equivalent to the stable phase and the effective north-seeking time is shortened.
Flow chart of fiber optic gyro temperature drift compensation model
Fiber optic gyro static experiment results
Fiber optic gyro temperature compensation effect