1 General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Specifications for optical fibre test methods-part 20: measurement methods and test procedures for dimensions- fiber geometry: GB 15972.20–2008[S]. Beijing: Standards Press of China, 2008.
Yin A E, Jiang Z X, Zhang Y L. Refracted near-field technique for the measurement of optical fiber refractive index profiles[J]. ActaOpticaSinica, 1989, 9(2): 181–185. DOI
4 Gao Y C. Simulation of measuring the optical fiber refractive index profiles by refraction near-field method[D]. Harbin: Harbin Engineering University, 2012.
Sun H G, Chu J R, Zhong L S, et al. Measurement of refractive-index profile of plastic optical fibers[J]. OpticalFiber& Electric Cable, 2001(4): 12–16. DOI
7 Wu Z H. The research about measurement system of six-angle fiber geometrical dimension on the basis of CCD and image processing[D]. Taiyuan: Taiyuan University of Technology, 2006.
8 Ma L D. Research on effective mode area measurement of photonic crystal fiber[D]. Qinhuangdao: Yanshan University, 2016.
Hameed M F O, Obayya S S A. Modal analysis of a novel soft glass photonic crystal fiber with liquid crystal core[J]. JournalofLightwaveTechnology, 2012, 30(1): 96–102. DOI
Rosa L, Coscelli E, Poli F, et al. Thermal modeling of gain competition in Yb-doped large-mode-area photonic-crystal fiber amplifier[J]. OpticsExpress, 2015, 23(14): 18638–18644. DOI
11 Yang Y. Research on detecting optical fiber geometric parameter based on machine vision[D]. Harbin: Harbin Engineering University, 2011.
Guo M, Hu L L, Zhao J T. Surface defect detection method of ceramic bowl based on Kirsch and Canny operator[J]. ActaOpticaSinica, 2016, 36(9): 0904001. DOI
Wang W G, Wang S R, Xu Z F, et al. Optimal ellipse fitting algorithm of least square principle based on boundary[J]. ComputerTechnologyandDevelopment, 2013, 23(4): 67–70. DOI
Gander W, Golub G H, Strebel R. Least–squares fitting of circles and ellipses[J]. BIT Numerical Mathematics, 1994, 34(4): 558–578. DOI
Mitchell D R G, Van den Berg J A. Development of an ellipse fitting method with which to analyse selected area electron diffraction patterns[J]. Ultramicroscopy, 2016, 160: 140–145. DOI
He C C, Yang J, Song H Y, et al. Effect of cutting tool aging on the geometric size measurement of single mode fiber[J]. ModernTransmission, 2016(1): 56–61. DOI
Liu W, Tang C H, Ma X M, et al. Measurement of geometric parameters of defective fiber ends[J]. StudyonOpticalCommunications, 2013, 39(6): 35–38. DOI